Linux-audio-user

linux-audio-user@lists.linuxaudio.org

12 participants
20649 discussions

RE: [linux-audio-user] ... like an old vinyl

by Reuben Martin

First: Using an equalizer, kill all frequencies below ~600 and above ~2k. Use a graphic EQ for this. (The two values are just examples, you can play with both frequencies to get the desired sound you're looking for.) Second: get a recording of the inside blank track that comes after the last song of a noisy record. Loop this noise and mix it over top of the song once you've done the band pass filter from step one. -Reuben -----Original Message----- From: Michal Seta [mailto:mis@creazone.32k.org] Sent: Wednesday, October 22, 2003 8:32 PM To: A list for linux audio users Subject: [linux-audio-user] ... like an old vinyl Hi all, Does anyone know if it's possible, under linux, to turn a good quality audio recording into a file that sounds like an old vinyl record. Any ideas? Realtime and non-realtime will be equally useful. Thanks. -- _ __ __ (_)___ Michal Seta / \/ \ _/^ _| / V |_ \ @creazone.32k.org (___/V\___|_|___/ http://www.[creazone]|[noonereceiving].32k.org

21 years, 8 months

[linux-audio-user] ... like an old vinyl

by Michal Seta

Hi all, Does anyone know if it's possible, under linux, to turn a good quality audio recording into a file that sounds like an old vinyl record. Any ideas? Realtime and non-realtime will be equally useful. Thanks. -- _ __ __ (_)___ Michal Seta / \/ \ _/^ _| / V |_ \ @creazone.32k.org (___/V\___|_|___/ http://www.[creazone]|[noonereceiving].32k.org

21 years, 8 months

Re: [linux-audio-user] ... like an old vinyl

by Sascha Retzki

--- Anahata <anahata(a)treewind.co.uk> wrote: On Wed, Oct 22, 2003 at 10:14:58PM -0500, Reuben Martin wrote: > First: Using an equalizer, kill all frequencies below ~600 and above > ~2k. Use a graphic EQ for this. (The two values are just examples, you > can play with both frequencies to get the desired sound you're looking > for.) > > Second: get a recording of the inside blank track that comes after the > last song of a noisy record. Loop this noise and mix it over top of > the song once you've done the band pass filter from step one. > That's a bit drastic for vinyl - more like an acoustically recorded 78rpm from about 1920. Those were pressed on shellac, not vinyl. The priciple's about the same, though - add a few random background ticks and clicks, a bit of white noise as many vinyl discs had tape noise from the master, possibly a bit of distortion on peaks if you want it to sound like a worn record/stylus, and also some gentle frequency variation at 0.5 Hz (for 33 1/3 rpm) to simulate a less-than perfect turntable or warped record. I'm sure it can be done with Linux tools... -- Anahata anahata(a)treewind.co.uk Tel: 01638 720444 http://www.treewind.co.uk Mob: 07976 263827 ------ I'd say its all possible with audacity: http://audacity.sourceforge.net Its an Multitrack-able Wave/Mp3/OGG-manipulation tool with LADSPA-support, I think. Anyway, there are a lot of "integrated plugins" that allows what you want to do. A real PROGRAMM can do what you want is not written, I think ... ;) Sascha Retzki _____________________________________________________________ Linux.Net -->Open Source to everyone Powered by Linare Corporation http://www.linare.com/

21 years, 8 months

[linux-audio-user] Standalone LADSPA host?

by Adam King

Hi all, I was wondering if there is any application that can just act as a standalone LADSPA host - with a jack input/output that can be inserted into the signal chain. I've searched the net but couldn't find exactly what I'm after. Does such an application exist - or are there any plans for one? Cheers.

21 years, 8 months

Re: [linux-audio-user] ALSA, jack and the other stuff: Two cardshandling

by Sascha Retzki

--- Benjamin Flaming <lau(a)solobanjo.com> wrote: > I am the guy with the alsa problem you remember me ? Well, I recompiled alsa, this time without any unresolved symbols... . Don't work right, What exactly doesn't work? > but I installed a second card from which I know that it worked well, How do you know this? > but this card cannot output something ( the hardware-outport is broken [ ooups ] )... . Do you mean the card is physically broken? Do you get error messages when you try to use it? Have you used a program such as alsamixer to bring up the volume level, which defaults to all the way off? > Everything seems to work fine, What is "everything"? You just said the first card didn't work right, and the second card had no output. > except that alsa uses my broken card, the ES1371 for audio output. If I understand ALSA correctly, this is because it is the default device -hw:0. I think you would need to explicitly tell ALSA to use a different device. Have you read up on .asoundrc files? (I haven't (I know I ought to) - but I think it might be the answer). > If I set jack to Playback via the card with index 1 , so my ESS-Solo1 (snd-es1938): > # jackd -d alsa -d hw:0 -P hw:1 Why do you say "-d hw:0" if you want it to use hw:1? Try this: jackd -d alsa -d hw:1 Good luck :) |) |)enji ----- LOL, hi ! I see that it is "irresponsible" to post a msg begins with 'you know iam the guy xy, I had x problem' ... . Well: I have had several problems with my ESS-Solo1 soundcard to start various sound apps which using jack ... . The second card, the Es1371, IS able to start jack, the esssolo1 quits with some alsa-error msgs. I first thought the esssolo1-problem is a symbol-problem in the alsa-modules, but a recompilation ( a successfull ) did not change something with the "support" of the esssolo1 with jack. So my Ess-Solo1 cannot be used via jack. My second card, Es1371, can , but it is physically broken. just the output-port, so this little "whole" where I put the speakers in, you understand ? I want to pipe jack-output to my first card, the Ess-Solo1. So I want to use my Es1371 for my MiDI-keyboard, for capturing AND for STARTING various soundapps like muse,ardour and Rosegarden4 and so on, but let the Ess-Solo1 output all the stuff jackd gets. (*puh* ) So, my cards are NOW: Ess-solo1 <-> hw:0 Es1371 <-> hw:1 # jackd -d alsa -d hw:1 -P hw:0 Should set jack to USE the hw:1, so Es1371 and output via hw:0, my Ess-Solo1, right ? I think thats the question of my originally mail ;) . Sry, but I exchanged the order of both cards, I think in my first mail Ess-solo1 was hw:1 , but this is not good. You pointed it: My ess-solo1 is my normal sound-card for listening to music and so on, and it should be the first alsa card. So, the above command prints out the help-menue which u get via: # jackd -d alsa --help Why ? greetz, Sascha Retzki _____________________________________________________________ Linux.Net -->Open Source to everyone Powered by Linare Corporation http://www.linare.com/

21 years, 9 months

[linux-audio-user] ALSA, jack and the other stuff: Two cards handling

by Sascha Retzki

Hi! I am the guy with the alsa problem you remember me ? Well, I recompiled alsa, this time without any unresolved symbols... . Don't work right, but I installed a second card from which I know that it worked well, but this card cannot output something ( the hardware-outport is broken [ ooups ] )... . This is my modules.conf: alias char-major-116 snd alias snd-card-0 snd-ens1371 alias snd-card-1 snd-es1938 alias char-major-14 soundcore alias sound-slot-0 snd-card-0 alias sound-slot-1 snd-card-1 # Es1371 #alias sound-service-0-0 snd-mixer-oss #alias sound-service-0-1 snd-seq-oss #alias sound-service-0-3 snd-pcm-oss #alias sound-service-0-8 snd-seq-oss #alias sound-service-0-12 snd-pcm-oss # ESS-Solo1 alias sound-service-1-0 snd-mixer-oss alias sound-service-1-1 snd-seq-oss alias sound-service-1-3 snd-pcm-oss alias sound-service-1-8 snd-seq-oss alias sound-service-1-12 snd-pcm-oss # options snd major=116 cards_limit=2 options snd-ens1371 index=0 options snd-es1938 index=1 ---- Everything seems to work fine, except that alsa uses my broken card, the ES1371 for audio output. If I set jack to Playback via the card with index 1 , so my ESS-Solo1 (snd-es1938): # jackd -d alsa -d hw:0 -P hw:1 Jack just prints out the helpscreen, and if you have a look by yourself: ... -P,--playback [name] playback output and optionally set the playback device (default: duplex) ... [name] can be "optionally set (to) the playback device", in my case hw:1, so my second card with card index 1, see modules.conf. Why this jack-error ? And any idea why sound-output is not piped by alsa generally ?? Thx for attention Sascha Retzki _____________________________________________________________ Linux.Net -->Open Source to everyone Powered by Linare Corporation http://www.linare.com/

21 years, 9 months

[linux-audio-user] [ANN] - Ircam Résonances 2003 - Journée "Logiciel libre musical" 23 octobre - "Free software for music" conference october 23 -

by Francois Dechelle

======================================================================== L'Ircam organise dans le cadre de Résonances 2003 une journée pour faire le point sur les logiciels libres dans le domaine musical et audio professionnel, l'évolution de Linux vers plus de facilité d'utilisation, les compatibilités avec les équipements audio, les drivers audio et MIDI. Date : Jeudi 23 octobre 2003, de 10h à 18h Lieu : Ircam, Studio 5 Conditions d'accès : entrée gratuite sur inscription auprès de Sylvie.Benoit(a)ircam.fr, en fonction des places disponibles Les présentations sont disponibles en ligne et sont diffusées en streaming audio, vous pouvez les suivre en direct et intervenir par le canal IRC: - programme et présentations: http://freesoftware.ircam.fr/article.php3?id_article=64 - streaming : http://freesoftware.ircam.fr:8000/resonances.ogg - IRC : site irc.linux.org, channel #ircam Pour plus d'informations: http://freesoftware.ircam.fr, http://resonances.ircam.fr ======================================================================== Ircam organizes during Résonances 2003 a one-day conference to have an update on free musical and professional audio software, the evolution of Linux towards an easier use, compatibility with audio equipment, audio drivers and MIDI. Date : Thursday, October 23rd, 2003, 10:00am to 06:00pm Venue : Ircam, Studio 5 Access conditions : Free entrance upon registration : Sylvie.Benoit(a)ircam.fr, depending upon available seats Important : presentations are available on line and are streamed, you can follow the talks and ask questions using the IRC: - program and presentations : http://freesoftware.ircam.fr/article.php3?id_article=65 - streaming : http://freesoftware.ircam.fr:8000/resonances.ogg - IRC : site irc.linux.org, channel #ircam For more informations: http://freesoftware.ircam.fr, http://resonances.ircam.fr ========================================================================

21 years, 9 months

[linux-audio-user] vst plugins+instruments/cubase under linux

by luigi rensinghoff

Hi there ! I have a question concerning vst plugins/instruments under linux. I would like to use vst/plugins/instruments lets say absynth under linux and being controlled by pure data. I wonder if someone has tried a setup like that. Is it better to run vstserver or to run cubasesx under wine and within that the vst-plugins/instruments ??? Does someone have a cubasesx running under wine with vst instruments inside ??? How do i communicate with pd ?? Through midi-audio /JACK-connction ??? The howto i found http://www.djcj.org/LAU/quicktoots/toots/vst-plugins/ is a little bit too superficial (at least for me since i am not such a linux expert) , Is there anything more in depth - including all the steps for wine etc ??? Thanks in advance Luigi __________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com

21 years, 9 months

[linux-audio-user] muse: no alsa :(

by Sascha Retzki

Hi! I've tried to start muse and it failed to start alsa audio with these error msgs: $ sudo muse JACK ERROR: cannot connect to jack server JACK ERROR: cannot connect to default JACK server initJackAudio: failed: jack server not running? NO Config File </home/lantis/.MusE> ALSA: samplerate 44100 not available, using 0 ALSA: set buffer size, req: 3072 got: 0 ALSA: Unable to install hw params: $ And THIS is my jackd output: $ sudo jackd -d alsa -d hw:0 jackd 0.75.0 Copyright 2001-2003 Paul Davis and others. jackd comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK compiled with System V SHM support loading driver .. creating alsa driver ... hw:0|hw:0|1024|2|48000|nomon|swmeter|rt open jackd: pcm.c:5959: snd_pcm_mmap_begin: Assertion `pcm && areas && offset && frames' failed. received signal 6 during shutdown (ignored) $ If I start jackd with "jackd -d alsa" : JACK compiled with System V SHM support loading driver .. creating alsa driver ... default|default|1024|2|48000|nomon|swmeter|rt open ALSA lib pcm_plug.c:727:(snd_pcm_plug_hw_refine_schange) Unable to find an usable access for 'default' ALSA lib pcm_plug.c:727:(snd_pcm_plug_hw_refine_schange) Unable to find an usable access for 'default' ALSA: mmap-based access is not possible for the capture stream of this audio interface ALSA: cannot configure capture channel starting engine engine driver not set; cannot start cannot start main JACK thread jack main caught signal 15 received signal 11 during shutdown (ignored) $ And thats why I am here: NOTHING seems to work :((((((( . I have alsa version 0.9.7, Debian unstable, a 2.4.21-xfs and a ESS-Solo1 compatible Terratec 128 PCI soundcard. Sound works fine, but my Midi-keyboard not ( aconnect'ing it to the internal FM synth and trying to use it with the miniFMSynth, an example programm from the alsa development tutorial of Mathias Nagorni) .... . Where can be other errors ??? No ideas anymore, any help wanted!! greetings, Sascha Retzki _____________________________________________________________ Linux.Net -->Open Source to everyone Powered by Linare Corporation http://www.linare.com/

21 years, 9 months

[linux-audio-user] Fedora and ALSA drivers.

by Richard

Hi all I try to compile ALSA drivers for Fedora and up to now im hitting a brick wall.Any alsa version 0.9.6 to the latest 0.9.7c is not compiling.It all fails. The failures vary and mileage vary. It all configures right but build fails. Anyone on the list succeeded with building the drivers on Fedora ? Thanks :) Richard

21 years, 9 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user