Hallo,
I just stumbled accross this:
http://www.skale.org/
No source code, too much 3d-shadows im my opinion but I guess a lot of
people will like it...
ciao
--
Frank Barknecht _ ______footils.org__
When using a RME Hammerfall DSP card (like in my case the pci interface
together with a multiface) the 'hdsploader' program from Thomas Charbonnel
is used to load the firmware into the card (that's what the README says).
I am not really sure if I do understand correctly what this means.
Would someone who really knows be so kind and correct me if I am wrong.
AFAIK hdsploader must be called once after booting the hardware and
after loading the snd-hdsp module. Without that snd-hdsp cannot work.
Right?
There is firmware on the RME website. I guess this firmware is *not* the
same as the one hdsploader loads into the card. I guess, the RME firmware
is burnt into FLASH memory of either the interface card (pci or cardbus)
or the soundcard (digiface, multiface) or maybe both, while the firmware
hdsploader cares about seems to be stored in RAM of the soundcard (and/or
interface). Is this correct?
Thanks a lot for helping me to understand,
Robert Epprecht
Hi,
I am trying out a small project whereby I wanna transform my gentoo linux
box (2.4.20-r5) into a linux dj rig. So far I have catalogued the bpms of
all my mp3s
with bpmdj, have an external mixer, but where I have hit a snag is
configguring my system to see my 2 sound cards. My "primary" unit is
an SB LIve and it runs smoothly under alsa. My second unit was initially
an Aureal Vortex unit but the alsa drivers weren;t as "easy" to get going
as the ones for an old SB Ensoniq 1370 that I had so I threw it in
instead. And duly recopiled alsa with supoprt for both.
I made changes to the /etc/modules.d/alsa, in the hope of getting devfs to
create new nodes for the device...such as a second dsp and mixer....but as
usual devfs is being a b*()*$ ..... does anyone know how I can get around
my problems....or can anyone who has succesfullys set-up more than one
soundcard in the same box give me any suggestons.
Cheers
Simon
Greetings:
I'm having an interesting problem with JACK (0.81.1). When running it
I can't start non-JACK apps, e.g., after starting JACK (with Rui's neat
qjackctl) I'm unable to open Snd until I stop JACK. Is this expected
behavior ? I hope not...
Best regards,
== Dave Phillips
The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm
The Linux Soundapps Site at http://linux-sound.org
In a message dated 9/22/2003 8:37:01 PM Eastern Daylight Time, linux-audio-user-request(a)music.columbia.edu writes:
>
> Sorry, I seem to have officially hijacked this thread
> without intending
> to do so ;o I hope Matt will forgive me.
You deserve to - you put the rpms together!
...isn't available on Linux. Any suggestions for
what program and/or combination of programs I can
use to get similar functionality?
Peace,
=Pete
--
You can only run configure at the top level of the Ardour source tree.
You don't want to know why this is true. Don't try to work around it.
Hello all - many people seem to reccommend turning off CD polling to improve
latency and such...I agree, but for the life of me I can't figure out how to
do it! :)
I'm running red hat 9 with KDE and the best i've been able to find is "turn it
off somewhere in the KDE control panel" - does anyone have a more detailed
account of where to go?
thanks!
--------------
Aaron Trumm
NQuit
www.nquit.com
--------------
Hi
Is there a way to convert one channel from a midi file to wav and then
import it to audacity. I know I can use timidity to convert midi to wav,
what would be the best way to just export one channel to wav.
Regards
Hi!
gmorgan is a .. Rhythm Station, an organ with auto-accompaniment and a
"small" Band in a Linux Box. Uses MIDI and the ALSA sequencer for play the
rhythm patterns. Styles, patterns , sounds, and the mixer settings, can be
edited and saved.
Program is released GNU/GPL version 2.
== v0.17 (22/09/2003) ==
----------------------------------------------------------------------------------
- Rewrited Sequence Export Midifiles.
- Solved bug generating Midifiles.
- Added Control Pattern example.
- Pattern File Format Changed.
- Added Pattern Control Edit Window.
- Added Master Tune.
REQUERIMENTS
--------------------------
Linux
ALSA
Fltk
Midi Keyboard (Optional).
Available in:
http://personal.telefonica.terra.es/web/soudfontcombi/http://www.telefonica.net/web/soudfontcombi/http://perso.wanadoo.fr/guy.clotilde/GMORGAN/index.html
Grettings
Josep
>
> For now, though, I would work on updating alsa or solving
> the firmware
> issue (downgrade?).
Yeah... I tried using the RME firmware update app on windows... but it did nothing to get get from 50 down to 11, even after a complete shutdown and power-off. I haven't even found 50 listed on the RME website as something that exists... but I sent a message to george@xvisionaudio, who is listed as an RME support person, so I might get a message on Monday. Anyway, hopefully the new alsa drivers will have a viable update.
M