When running Frank's exmaple pd patch (and all the others I've tried)
under JACK, using the Planet CCRMA version of pd I get lots of IO Errors
reported by pd, even though there doesnt seem to be any dropouts, the cpu
load is low and jack doesnt report any xruns.
Is there a .pdrc file or something where I can set the block size to make
it match jacks? Or is there something else wrong?
Cheers,
Steve
HI!
I'm brazilian. So... please, be patience with my english.
I try to compile ardour(version 0.9beta3).
But my CPU is a AMD-450. i586.
I see in the configure script in the directory .../libs/ardour some C Flags
for i686.
Is correcty?
Probably I have problems with this flags?
In time, i can't compile ardour because one error.
Somebody can help-me with this error?
I can't subscribe in the ardour-dev or ardour-user mailing list. :(
I need change my e-mail because I never post any message in these mailings.
make[4]: Entering directory `/home/MODEM/ardour-0.9beta3/libs/ardour'
source='diskstream.cc' object='diskstream.lo' libtool=yes \
depfile='.deps/diskstream.Plo' tmpdepfile='.deps/diskstream.TPlo' \
depmode=gcc3 /bin/sh ./depcomp \
/bin/sh ./libtool --mode=compile g++ -DLOCALEDIR=\""/usr/local/share/locale"\"
-I. -I. -I. -D_REENTRANT -O6 -mcpu=i686 -march=i686 -fomit-frame-pointer
-ffast-math -fstrength-reduce -fmove-all-movables -Wall
-I/home/MODEM/ardour-0.9beta3/libs/sigc++
-I/home/MODEM/ardour-0.9beta3/libs/sigc++/sigc++/config
-I/home/MODEM/ardour-0.9beta3/libs/pbd
-I/home/MODEM/ardour-0.9beta3/libs/midi++
-I/home/MODEM/ardour-0.9beta3/libs/ardour
-I/home/MODEM/ardour-0.9beta3/libs/soundtouch -I/usr/include/glib-1.2
-I/usr/lib/glib/include -I/usr/local/include -I/usr/include/libxml2
-DCONFIG_DIR=\"/usr/local/etc\" -DDATA_DIR=\"/usr/local/share\" -c -o
diskstream.lo `test -f 'diskstream.cc' || echo './'`diskstream.cc
g++ -DLOCALEDIR=\"/usr/local/share/locale\" -I. -I. -I. -D_REENTRANT -O6
-mcpu=i686 -march=i686 -fomit-frame-pointer -ffast-math -fstrength-reduce
-fmove-all-movables -Wall -I/home/MODEM/ardour-0.9beta3/libs/sigc++
-I/home/MODEM/ardour-0.9beta3/libs/sigc++/sigc++/config
-I/home/MODEM/ardour-0.9beta3/libs/pbd
-I/home/MODEM/ardour-0.9beta3/libs/midi++
-I/home/MODEM/ardour-0.9beta3/libs/ardour
-I/home/MODEM/ardour-0.9beta3/libs/soundtouch -I/usr/include/glib-1.2
-I/usr/lib/glib/include -I/usr/local/include -I/usr/include/libxml2
-DCONFIG_DIR=\"/usr/local/etc\" -DDATA_DIR=\"/usr/local/share\" -c
diskstream.cc -MT diskstream.lo -MD -MP -MF .deps/diskstream.TPlo -o
diskstream.o
diskstream.cc: In member function `int ARDOUR::DiskStream::do_flush(bool)':
diskstream.cc:1309: no matching function for call to `min(long unsigned int,
size_t)'
make[4]: *** [diskstream.lo] Error 1
make[3]: *** [all-recursive] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all-recursive] Error 1
Can anyone recommend a simple pd patch that wont take too much CPU, runs
happiily in jack and takes a pair of streams does something noticable and
outputs a pair of streams?
The examples I tried generally dont do straight processing.
I should be able to make one myself really, but I dont have pd-fu :(
Thanks,
Steve
Hi!
I'm brazilian and I don't speak english. So... please... be patience :)
I have install jack 0.80 in one notebook Compaq presario 1200 with sound-card
snd-via-82xxx(this module is from Alsa-Project).
All songs in my coputer play with no problems.
But when I try start jackd the system showme this error:
JACK compiled with System V SHM support
loading driver ..
creating alsa driver ... hw:0|hw:0|1024|2|48000|nomon|swmeter|rt
jackd: pcm.c:689: snd_pcm_nonblock: Assertion 'pcm' failed.
received signal 6 during shutdown (ignored)
I create all of directories of README.
And I put in fstab the lines:
none /mnt/ramfs tmpfs defaults 0 0
shmfs /dev/shm shm defaults 0 0
My kernel support shm and i can mount manually this directories.
I do this because before my last installation(compile) I use
--enable-posix-shm
But in this time I remove all jack files os my system and killall -9 all
process of jackd and recompile with stadard options.
The error is the same(but change the first line "with POSIX ..." for "with
System V..."). Is OK.
So... my jack is compile with NO errors and the module of my sound card is ok.
The process of arts, esd, nas, etc, NOT exist in my process list(I use
WindowMaker).
I have the directories(mounted) /mnt/ramfs and /dev/shm.
I don't have any sound aplications started(no one).
But I get the same error.
I create the /tmp/jack with permissions 777.
When i start jackd this directory is removed!!!!
What's this error? Somebody have some idea what is this?
I speak to Patrick Shirkey and I get much help, but my problem seems to be in
my system.
Any help?
Thanks a lot!
Alexander
Brazil - Rio de Janeiro
I'm having problems recording from line in.
Without knowing exactly what's going wrong, all I
can say is that I can only playback "silence."
As I'm recording, I can hear the audio being fed
back through the external speakers. I can also use
various mixers to mute/unmute and set the volume on
the "Line" setting. So I'm pretty sure everything is
hooked up right.
I initially tried using sox/notlame/mpg123 ...
# record and encode
$ sox -t ossdsp -w -r 44100 /dev/dsp -t cdr - |
notlame -k -v -S - /tmp/out.mp3
# playback
$ mpg123 /tmp/out.mp3
I've since tried to simplify things ...
$ rec -d /dev/dsp /tmp/out.wav
$ play /tmp/out.wav
Neither of them work.
System details are provided below. What else can
I do to troubleshoot this?
Thank in advance
- gary
System
. redhat 8.0 (2.4.20-19.7)
. alsa-0.9.6
. Turtle Beach Santa Cruz sound card
$ lspci
00:0b.0 Multimedia audio controller: Cirrus Logic CS
4614/22/24 [CrystalClear SoundFusion Audio
Accelerator] (rev 01)
$ lsmod
Module Size Used by Not tainted
snd-seq-midi 5312 0 (autoclean) (unused)
snd-seq-oss 34720 0 (unused)
snd-seq-midi-event 6048 0 [snd-seq-midi
snd-seq-oss]
snd-seq 47280 2 [snd-seq-midi
snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 45284 0
snd-mixer-oss 16408 1 [snd-pcm-oss]
snd-cs46xx 80636 1
snd-rawmidi 18656 0 [snd-seq-midi
snd-cs46xx]
snd-seq-device 6284 0 [snd-seq-midi
snd-seq-oss snd-seq snd-rawmidi]
snd-ac97-codec 50264 0 [snd-cs46xx]
snd-pcm 85344 0 [snd-pcm-oss
snd-cs46xx]
snd-timer 19588 0 [snd-seq snd-pcm]
snd 43108 0 [snd-seq-midi
snd-seq-oss snd-seq-midi-event sn
d-seq snd-pcm-oss snd-mixer-oss snd-cs46xx snd-rawmidi
snd-seq-device snd-ac97-c
odec snd-pcm snd-timer]
soundcore 6372 8 [snd]
gameport 3440 0 [snd-cs46xx]
snd-page-alloc 9876 0 [snd-cs46xx snd-pcm]
$ cat /etc/modules.conf
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-cs46xx
# module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
=====
--
Gary Cote
gary(a)cotecorner.com
Hi!
gmorgan is a .. Rhythm Station, an organ with auto-accompaniment and a
"small" Band in a Linux Box. Uses MIDI and the ALSA sequencer for play the
rhythm patterns. Styles, patterns , sounds, and the mixer settings, can be
edited and saved.
Program is released GNU/GPL version 2.
Changes in v0.16 (08/09/2003)
----------------------------------------------------------------------------------
- Added some info messages.
- Changed ChangLog format.
- Minor bugs solved.
- Added HTML Help Browser inside.
- Changed About Screen.
- Added Collibri Style, thanks to Guy Daniel CLOTILDE.
- Added six Collibri Patterns, thanks to Guy Daniel CLOTILDE.
REQUERIMENTS
--------------------------
Linux
ALSA
Fltk
Midi Keyboard (Optional).
Available in:
http://personal.telefonica.terra.es/web/soudfontcombi/http://www.telefonica.net/web/soudfontcombi/http://perso.wanadoo.fr/guy.clotilde/GMORGAN/index.html
Grettings
Josep
Greetings:
While profiling FLAC I discovered that the format includes a metadata
format for including cue sheet data for use in CD mastering
applications. When I looked for a Linux-based cue sheet editor I found
only the very outdated CDB (CD Builder), which, true to its author's
advice, will not build under GTK 1.2 or 2.x. I thought perhaps JAM would
concern itself with cue sheet data but I think that's not its domain
(the FLAC docs note that the cue sheet data is intended for CD authoring
apps).
Btw, I downloaded and tried running some Windows-based cue sheet
editors under WINE, with varying success, but none were completely
useful. Maybe I should update my WINE installation again, but I'd prefer
a Linux-based solution anyway.
Sorry for the cross-post, I thought perhaps someone on LAD might be
developing such a creature (?). Do any users on LAU utilize a cue sheet
editor for any of their work ?
Best regards,
== dp
giovedì, 04 settembre 2003 alle 19:32:00, Rick Taylor ha scritto:
> Emiliano Grilli,
>
> > I think blender is one of the shiniest examples of a very good interface,
> > and of the power of the community behind it: a real "symbol" of open source
> > software (with the literal "liberation" to GPL!!!)
>
> It's only been open source for a few months. I think it's a great testament
> to what someone can do if they don't accept the accepted... think for
> themselves, all that...
I'm not sure what you mean here... AFAIK blender is still under GPL
license. I don't know well the hystory of NaN but IIRC after the 100k $
collection blender now is free software (as in freedom)...
> Don't forget who wrote it.
I don't know them, are they "enemies" of OSS?
Bye
--
.-----------------------.
| Emiliano Grilli |
| emillo(a)libero.it |
| Linux user #209089 |
| http://www.emillo.net |
'-----------------------'
How is everyone extracting RAR archives? I tried using a shareware linux rar
RPM, with the rar executable dated March 2001, but it fails on the base drum
kit sound font from www.nskit.com , which the message "Unknown method in ..."
for each of the component files.
Is there a newer linux rar available somewhere, or is it recommended instead
to use winrar in wine?
Larry
