Hi all
I'm very happy to announce that I just released a new album entitled
"2013", under my electronic project "Modlys". I've put a lot of work
into it, and I'm quite happy with the result.
It's free as in beer, feel free to donate if you dig it!
http://music.modlys.dk/album/2013
Hope you enjoy!
--
Atte
http://atte.dkhttp://modlys.dk
Hi all!
In the past few months I've been fiddling with the kernel config to
get the best latency out of my laptop (core2 t6400, 2GHz 1MB L2, 4GB
of RAM).
The best settings I've got so far are 128*3 with a sample rate of
48000Hz. All of this with the rt-patch and following the guide in the
linux audio wiki.
My question is regarding the method described here
http://proaudio.tuxfamily.org/wiki/index.php?title=DAW_Digital_Audio_Workst…
I've seen this described in many a forum, and people say they got
better results with it than with the rt-patch.
Do you have any experiences with the cgroups solution? Is it stable
enough for live performance?
I will be testing it some time in the future, but I thought it would
be a good idea to fire up the discussion here and make it for a common
profit.
Thanks a lot to all of you. It's great to know there's a place for the
really independent musician to learn and share for free with his
fellow hackers around the globe.
Bye
Hi all,
I have played a little bit around with ardour3 and the import function of
freessound.org. For mixing and mastering I have use a lot of linuxdsp and
calf plugings. I hope the mix is ok.
http://soundcloud.com/ch-bunge/free-sound-lab44
thanks
chris
Hello,
(Sorry for crossposting from Ardour list but I figured someone here
could answer faster).
I clicked on 'something' in Ardour 3.5.358 top bar and now it's
gone. It was hiding behind the main window, so I clicked on the small
up arrow on the right of the stand-alone bar (eg. detached window for
these controls) and now, it's really gone from sight. I've browser the
menu options but did not find where to re-activate it. Cannot record,
sicne the record button is part of the bar. I have loaded the Axiom 25
control interface, but the record button of the Axiom does not enable
recording (play and rewind works).
How to make the top control bar visible again ?
Thanks !
I have an Ardour project that was recorded with Ardour setup as a Jack
slave, driven by Muse. It correctly tracks the tempo from Muse at
130bpm. However, it has ended up with a tempo timeline tag of 120bpm.
Is that something hardcoded? Should I change it in the Ardour project
to reflect the true tempo? Why didn't it notice that it was tracking
faster than that?
--
+ Brent A. Busby + "We've all heard that a million monkeys
+ Sr. UNIX Systems Admin + banging on a million typewriters will
+ University of Chicago + eventually reproduce the entire works of
+ James Franck Institute + Shakespeare. Now, thanks to the Internet,
+ Materials Research Ctr + we know this is not true." -Robert Wilensky
Hi,
I have just finished two XSL stylesheets for converting specimen banks
to the save format used by petri-foo, so a user can easily switch to
petri-foo:
https://github.com/residuum/specimen2petri-foo
There are two stylesheets, depending on your locale settings, i.e. if
your locale uses comma or dot as decimal separator (if 1/2 is saved as
0.5 or 0,5 on your system).
If there are any other decimal separators out there your copy
s2p_comma.xsl and replace strings "0," and "1," to your settings. Do not
do that with s2p_dot.xsl, because necessary version information for XML
and XSL use strings like "1.0" etc.
Standard sample rate is set to 44.1 kHz, if you want to change to
another value, just edit the value in line 6.
If you encounter any bugs, open an issue on Github or send me an email.
Thanks,
Thomas
--
"We left all that stuff out. If there's an error, we have this
routine called panic, and when it is called, the machine crashes,
and you holler down the hall, 'Hey, reboot it.'" (Dennis Ritchie)
http://www.residuum.org/
Has anyone else come across this issue with the LADSPA Caps Plate
plugin with the effect on Arch being very much reduced compared with
the amount of effect provided by the same plugin in Debian?
With the plugin tail and bandwidth set to maximum, damping at a
minimum, and no dry effect, silence arrives in a flash.
Its a problem I've noticed for several months...
James.
Hi list,
hdsploader (via hotplug) on my box seems to load firmware at will.
Sometimes it loads the Digiface firmware into my Multiface, sometimes
it loads the correct one.
I suppose I could simply delete the digiface firmware from the path,
but what is it that makes it load the wrong one?
correct one:
kernel: [98033.160982] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
kernel: [98033.161012] pci 0000:05:00.0: no hotplug settings from platform
kernel: [98033.161264] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002)
kernel: [98033.467674] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
kernel: [98033.474630] snd_hdsp 0000:05:00.0: firmware: agent loaded multiface_firmware_rev11.bin into memory
wrong one:
kernel: [98146.327251] Hammerfall-DSP: loading firmware
kernel: [98149.392459] Hammerfall-DSP: finished firmware loading
kernel: [98243.384790] pci 0000:05:00.0: BAR 0: assigned [mem 0xf0000000-0xf000ffff]
kernel: [98243.384824] pci 0000:05:00.0: no hotplug settings from platform
kernel: [98243.385118] snd_hdsp 0000:05:00.0: enabling device (0000 -> 0002)
kernel: [98243.689751] snd_hdsp 0000:05:00.0: firmware: agent loaded digiface_firmware_rev11.bin into memory
Does someone else have the same issue?
best, P
Dear list,
allow me to post a question here that I already sent to alsa-user, but
without any response so far, thank you!
----------8<-----------
Hi all, now here is one of the weirdest problems I have come across in
the past years. Actually it is halting my current production even, but
I am primarily interested how this error is caused (and how it can be
solved):
The sampling rate of my RME HDSP Card is set from "Internal 44.1k" to
"Internal 48k" upon connecting a Yamaha DM1000 mixing console via usb!
The console does not provide a USB audio interface, but several midi
ports over USB, using the snd_usb_audio module.
cat /proc/asound/cards:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf2520000 irq 43
1 [DSP ]: H-DSP - Hammerfall DSP
RME Hammerfall DSP + Multiface at 0xf0000000,
irq 19
2 [DM1000 ]: USB-Audio - DM1000
Yamaha DM1000 at usb-0000:00:1d.0-1.2, full
speed
29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control
ThinkPad Console Audio Control at EC reg 0x30,
fw 6QHT26WW-1.07
>From HDSP's alsamixer I can see that upon connecting the DM1000 the
control "Sample Clock Source Locking" gets set to [Off], and the
sample rate is set to 48k as described above.
The change is also reflected in the 'hdspconf' software that
configures some properties of the card.
cat /proc/asound/pcm does not list the DM1000:
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
00-03: HDMI 0 : HDMI 0 : playback 1
01-00: RME Hammerfall DSP + Multiface : RME Hammerfall DSP + Multiface : playback 1 : capture 1
This is on a Debian box runnig kernel 3.2.0-4-rt-amd64
Let me add here, that upon starting any audio application using the
same card under alsa can (re)set the sampling rate to the correct
value.
If the mixer is re-connected, after that audio application was
launched, the sampling rate of the HDSP card is changed to 48k,
causing an audible transposition.
Can anyone imagine what causes this strange behavior?
Thank you so much for all hints
best, P
Already sent to the Rivendell users list several days ago but so far nobody
seems to be doing exactly this so I thought the wider linux audio community
might have some valuable insight.
Looking for ideas / thoughts / discussion / advice on:
a small box to put in remote locations.
it will:
have a tuner card(s) or an external radio(s)
record the input from the radio via rotter (other?)
send to an icecast instance for remote listening.
be low power and inexpensive.
Hopefully be able to handle more than one station on the same box.
Links for those who may not know of rotter or some of the other bits I want to
run.:
Rotter - http://www.aelius.com/njh/rotter/
Liquidsoap - http://savonet.sourceforge.net/
Darkice - http://code.google.com/p/darkice/
Icecast - http://www.icecast.org/
all the best,
drew