LinuxSampler [1] is a modular, streaming capable sampler. It was designed
decoupled from any user interface, that is as sampler backend which can be
controlled via network connection from an arbitrary place, using a custom,
ASCII based protocol called LSCP [2].
[1] http://www.linuxsampler.org
[2] http://www.linuxsampler.org/documentation.html
Focus of this first release was an adequate support of the Gigasampler format,
including experimental support for the new Gigasampler v3 format. For a
complete list what is already covered and what is not, check the features
site [3].
[3] http://www.linuxsampler.org/features.html
Planned next:
* strong synthesis optimizations
* support for further sampler formats
* instrument database system
* implementation of further control interfaces like OSC [4]
* SMP and network cluster support
* as ports to other OSs are already on the pipe, maybe a new name :P
You might want to use QSampler [5] as convenient graphical frontend to
LinuxSampler. You can get everything from the downloads site [6].
[4] http://www.cnmat.berkeley.edu/OpenSoundControl/
[5] http://qsampler.sourceforge.net
[6] http://www.linuxsampler.org/downloads.html
CU
Christian
Hi, I've been trying to get my two sound cards to work: an integrated
SiS (S17012), and a SoundBlasterLive (EMU 10K1). Both were detected fine
by alsaconf. But I am only able to get the SoundBlaster to play though
XMMS, XMMS says it's at hw:1,0, where the SiS is at hw:0,0. there is
also antoher entry in the XMMS ALSA configuration that says
"Sound Blaster Live!: EMU 10k1 FX8010 (hw:1,3)"
Have no idea why that is there..
Also, GNOME has aprantly switched over to using OSS, (I can see this in
the volume controlls) how can I change this to alsa?
Any help would be apperciated! :)
-- Mads
Ok, I'm playing live tommorrow (5/25) using my
demudi/debian laptop with terminatorX, live processing
a bunch of stuff I created with csound from 10pm-1am
at the Nova Express Cafe:
http://www.novaexpresscafe.com/
426 N. Fairfax Ave. Hollywood
You can hear my demo and read more at:
http://www.brianwredfern.com
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
Is anyone aware of what might be the best open source audio
mixing package to start hacking something like the Castblaster
that is aurally (partly) described where ?
http://homepage.mac.com/dailysourcecode/DSC/DSC-2005-04-25.mp3
Any hints to shorten the devel cycle for a project like this
would be gratefully appreciated. I'm chasing up some funding
to hopefully subsidise a developer if one wants to get involved.
No, tweaking PD is not my idea of getting aunt tillie into
podcasting on linux, she needs a lightbulb that "just works" :-)
--markc
Hi,
After a long time laying in the backyard, QSynth 0.2.3 is being released
to the world :)
Qsynth is a Qt GUI front-end application to the excellent fluidsynth
soundfont2 engine.
You can check it out, right away from:
http://qsynth.sourceforge.net
The fine print goes like there's no really big new features on this. After
all its only a minor dot-realease. As you may find from reading the
changelog, there's a:
- New option for system tray icon and menu, which is known to be effective
on KDE enabled desktops; support for freedesktop.org's system tray
protocol specification has been included so this maybe also effective on
Gnome2.
- Setup options for alternate MIDI and Audio devices were introduced.
- Output level meters get smoother and slightly layout optimized.
- Set to ignore the SIGPIPE ("Broken pipe") signal, where available, as
the default handler is usually fatal when a JACK client is zombified
abruptly.
- Messages window limit is now enforced only when the line count exceeds
in one third the user configured line count maximum; if Qt 3.2.0+ is in
use, the QTextView widget is otherwise set to the optimized Qt::LogText
format.
- Updated Mac OS X build instructions (README-OSX, by Ebrahim Mayat).
That's it.
Enjoy!
--
rncbc aka Rui Nuno Capela
rncbc(a)rncbc.org
I've got a Terratec DMX 6-fire card (ice1712/envy24 chipset) running in
a headless box with no X; I control it from the commandline over ssh.
Does anyone know if there is a way of running envy24control without X?
or is there a commandline mixer that has the same capabilities? Or even
some comprehensive documentation for amix? the man pages are fairly cryptic.
Specifically, the problem is that I can't persuade the front panel phono
input to accept a stereo signal; amix is convinced that it's mono.
--
Edward Barrow
I wonder if anyone could suggest some useful settings for a couple of plugins.
I'm working with Ardour right now.
I want to use SC4 to essentially 'flatten out' a vocal take. I know such
approaches are generally frowned on around here, but the take has a large
dynamic range and it simply won't sit right in the mix any other way. I'm
really not sure where to put the threshold and compression ration to achieve
this kind of effect and I could do with some guidelines on attack, decay and
knee settings. It's a pop song, and yes I really do want it to sound like
that. any ideas?
The other issue is stereo reverb. What I want is a little pre-delay followed
by a long _smooth_ tail. Putting freeverb across the master track inputs just
sounds like I dropped the band in a bucket. There must be a way of doing
this. Would it be the way to make a separate stereo track for the reverb? I
notice some plugins don't have any signal mix control. I have also noticed
that many of the TAP plugins make bad broken noises in Ardour, should I not
be using them in this environment?
Any thoughts, experiences, pointers etc. gratefully received. I reckon I'll be
posting some oggs up soon at this rate. ;)
cheers,
tim hall
http://glastonburymusic.org.uk
Quoting Edward Barrow <edward(a)copyweb.co.uk>:
> I've got a Terratec DMX 6-fire card (ice1712/envy24 chipset) running in
> a headless box with no X; I control it from the commandline over ssh.
Does the box you command it from have X? You could then open the envy24mixer
from the remote machine to the X server running on the "client".
To enable X11 forwarding from the ssh client do:
ssh -X user@host
You might need to enable X11 in the server sshd config, in debian: add or
uncomment the line:
X11Forwarding yes
in /etc/ssh/sshd_config
Sampo
--- Esa Linna <esa.linna(a)kolumbus.fi> wrote:
>
>
> For some reason, my session file doesn't open in
> latest CVS (nightly
> tarball) version but it does in latest beta (RPM).
>
> Ardour only says "Segmentation fault" after
> crashing, when trying to
> open this file.
I think someone else reported segmentation faults
during file open and sent Paul a useful backtrace. If
you have the exact same problem I'd expect a fix soon.
ron
> QJackctl : "cannot read event response from client
> [ardour] (Resource
> temporarily unavailable)
> bad status for client event handling (type = 5)
> cannot write request result to client
> could not handle external client request
> unknown source port in attempted connection
> [ardour:auditioner/out 1]"
>
>
> (I did sent this also to ardour users list)
>
Yahoo! Mail
Stay connected, organized, and protected. Take the tour:
http://tour.mail.yahoo.com/mailtour.html
Hi All,
I have a wav file which cdrecord is rejecting, I believe because it is
24 bit rather than 16; here is the output from 'file':
taylor_oxley_dixon.wav: RIFF (little-endian) data, WAVE audio,
Microsoft PCM, 24 bit, stereo 44100 Hz
Would someone be kind enough to tell me the command to convert this
file to 16 bit, please? The sox manpage has only confused me.
I did try:
$ sox taylor_oxley_dixon.wav taylor_oxley_dixon.cdr
sox: Failed reading taylor, oxley and dixon.wav: Sorry, don't
understand .wav size
Thanks in advance,
Kenneth