Linux-audio-user

linux-audio-user@lists.linuxaudio.org

12 participants
20637 discussions

Re: [linux-audio-user] Recording from SPDIF with Audiophile

by lau＠hippie-online.de

Jan Depner wrote: > > Try changing /dev/dsp to /dev/dsp0. Usually /dev/dsp is a link to > /dev/dsp0 but not always. This link is okay. > Also, can you see the signal in envy24control? Yes, I can see it an route it - directly or via the mixer - to the analog outputs. > I was under the impression that there might be a problem with > the SPDIF inputs on the envy24 chipset cards with ALSA but I could be > wrong. I do not think so because I can mix, DA and output the signal. HippiE

21 years, 6 months

Re: [linux-audio-user] Recording from SPDIF with Audiophile

by lau＠hippie-online.de

tim hall wrote: > > Why are you using such an old version of alsa? > Perhaps this is the way SuSE does it (?:-) Right, this is part of SuSE 8.2. >>But how can I record the data? > > What do you mean by 'data'? If you just want the data, surely there is some > kind of way of 'mounting' the tape drive directly - As if it was a Tape > ARchive and then using standard tools to copy it where you want it - 'dd' ? Mounting the DAT recorder?! Sounds interesting... ;-) > You probably haven't read enough, and my experience is that it's easy to > overcomplicate matters. There may be a simpler solution. Oh yeah, and you > need to ask clearer questions. What I want to have is a 1:1 copy of the audio data of a DAT deck. For this I use its SPDIF-out and plug it to the SPDIF-in of the Audiophile. Using envy24control I can route the signal to the cards internal mixer or to its outputs. But how can I record it to an audio file? Recording with Audacity results in a mute file. In its preferences I found the sole option /dev/dsp as recording device. I am determined to read more about it if you can tell me *what* to read... Ciao, HippiE

21 years, 6 months

[linux-audio-user] Recording from SPDIF with Audiophile

by lau＠hippie-online.de

Hi there, I still try to record a DAT signal. In the meantime I installed a M-Audio Audiophile 2496 as card 0. I can configure it using envy24control (alsa 0.9.0) and route the signal to the mixer or directly to the outputs. But how can I record the data? Programs like Audacity or krecord do not "hear" it. What do I do wrong? Ciao, HippiE

21 years, 6 months

RE: [linux-audio-user] Suitable distro for audio works

by Matthew Allen

> -----Original Message----- > From: Dave Phillips [mailto:dlphilp@bright.net] > > PlanetCCRMA is definitely has the more current apps versions, but > AGNULA Demudi is really quite nice too. I have both systems installed > here, and I must say that I'm impressed by the AGNULA core system. Yes, > it's not pretty (yet), but it's well designed where it counts, and the > 1.1 release promises to bring the system into a more up to date > condition. I will 3rd (or 4th?) the Agnula recommendation. I had originally installed ccrma (which is fantastic for those who want to just get up and go!) but I wanted to do a lot of stuff with PD that wasn't yet supported under ccrma, but was supported under debian out of the PD CVS. I installed a base woody system, then set all of my apt stuff to testing, and used the Agnula disks to get the sound stuff set up. After some initial X and mouse problems with agnula (now being tracked in their bug databse) I was good to go. > I'm not sure when AGNULA 1.1 will be ready for release but > I'm sure it's Real Soon Now. ;) January 15th according to some recent posts of the Agnula list. > Next month's column for the Linux Journal On-line will briefly > describe my experiences with PlanetC and AGNULA. Cool. By the way Dave GREAT article in CMJ. I just got back from vacation, checked the mail, and saw the cover! Having just jumped into the Linux world I was happy to see the article. (A month or 2 to late for me, but I'm sure it will help a lot for others!) m.

21 years, 6 months

RE: [linux-audio-user] Using alsactl to preserve volume state

by eviltwin69＠cableone.net

Mark, Set state the way you want it then do alsactl store to save it. On reboot do alsactl restore and it will reset. The easiest way to do this is to add something to your rc.local script (wherever that is depending on distribution). On RH the best thing to do is add a file to /etc/rc.d/init.d that uses chkconfig (look at some of the other files in there). On start/boot it should do alsactl restore. On stop/halt it should do alsactl store. If you set it up like some of the other scripts in /etc/rc.d/init.d you should be able to turn it on by entering chkconfig FILENAME on. Jan -----Original Message----- From: "linux-audio-user-bounces(a)music.columbia.edu" <linux-audio-user-bounces(a)music.columbia.edu> on behalf of "Mark Constable" <markc(a)renta.net> Sent: Tue, 30 Dec 2003 21:39:21 +1000 To: "A list for linux audio users" <linux-audio-user(a)music.columbia.edu> Subject: [linux-audio-user] Using alsactl to preserve volume state On the Wiki there is this advice and the following statement so would anyone happen to know what the correct way to preserve state across reboots for 2.6 is ? # load/unload the volume settings on startup/shutdown post-install snd-driver-name /usr/sbin/alsactl restore pre-remove snd-driver-name /usr/sbin/alsactl store This doesn't seem to work with a 2.6.0-test kernel. modprobe simply ignores lines with these statements. Update to this section would be appreciated. --markc

21 years, 6 months

[linux-audio-user] Using alsactl to preserve volume state

by Mark Constable

On the Wiki there is this advice and the following statement so would anyone happen to know what the correct way to preserve state across reboots for 2.6 is ? # load/unload the volume settings on startup/shutdown post-install snd-driver-name /usr/sbin/alsactl restore pre-remove snd-driver-name /usr/sbin/alsactl store This doesn't seem to work with a 2.6.0-test kernel. modprobe simply ignores lines with these statements. Update to this section would be appreciated. --markc

21 years, 6 months

[linux-audio-user] Suitable distro for audio works

by Olivier

first post (or so) here so Hi everyone. Is there a distro out there that is best suited for audio work ? I am currently downloading agnula's work but was wondering was you guys were using. As an all purpose desktop system I use mdk 9.2. There is a large number of audio apps contributed for it but before going down that route or another, I thought I'd take some advice. I'd like to use software synth and a sequencer with a midi keyboard I have got at home. Thanks all ! Olivier

21 years, 6 months

[linux-audio-user] Getting cs46xx to work

by David Baron

Alsa recommnds this one with a DMan2044 PCI card (4-in, 4-out). The insmod fails with "no such device" Autodetections call for AGOPO Maestro or es1968, also Maestro. If I accept these, they install but naturally do not play.

21 years, 6 months

[linux-audio-user] Announce: Gnomoradio 0.7

by Jim Garrison

Hello, Last night, we released the first development release of Gnomoradio. Gnomoradio is a peer-to-peer music playing system that can read Creative Commons licenses and legally share files based on them. It can play mp3 files as well as ogg's. The program is currently available in source form for GNU/Linux and other UNIX-like operating systems. http://gnomoradio.org/ Download URL: http://gnomoradio.org/pub/devel/gnomoradio-0.7.tar.gz Jim

21 years, 6 months

[linux-audio-user] Audio cd recording "on the fly"?

by Emiliano Grilli

Hello, I wonder if anyone has a quick solution for recording audio data directly to cd writer... Bye -- Emiliano Grilli Linux user #209089 http://www.emillo.net

21 years, 6 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user