Linux-audio-user

linux-audio-user@lists.linuxaudio.org

20 participants
20609 discussions

by Anthony

Hi, I can't seem to find the page with the Gentoo Audio Ebuilds. A couple of things I've noticed is there is no alsa-cvs build. Also Steve's plugins (swh-plugins) seem to depend on alsa. Is that necessary? And I see nothing for libsamplerate which is a jack dependency. Thanks --ant

22 years, 3 months

[linux-audio-user] terratec dmx 6fire?

by nick

Hi all, I'm quite tempted to get one of these cards (terratec DMX 6Fire), now that i've seen it running on a friends computer, but would like to hear from anyone who has used one under linux. does it work? do all the channels work properly? (i.e i will get to use all 6 outs rather than the 2 main ones, as happened with my sblive) cheers, -nick d-.-b __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com

22 years, 3 months

[linux-audio-user] Digital connection from Alesis MasterLink to a Linux DAW

by John Ouzts

Would someone be kind enough to tell me how to connect the IEC 958 Type 1 balanced AES/EBU digital inputs and outputs of an Alesis MasterLink to a Linux DAW with an RME soundcard (not yet purchased)? Should I buy the HammerFall HDSP 9652 or one of the older cards for use with Linux? Which extension cards or external interfaces should I be looking at? I have a lot of Linux experience but very little digital audio experience. Many thanks. John Ouzts

22 years, 3 months

RE: [linux-audio-user] Which audio card to use?

by Richards, Ed

Here is another good one. Ed Richards http://www.djcj.org/LAU/guide/audio_quality_HOWTO.htm -----Original Message----- From: Janez Vrenjak [mailto:janez@kud-kontrabant.si] Sent: Thursday, January 16, 2003 9:21 AM To: linux-audio-user(a)music.columbia.edu Subject: [linux-audio-user] Which audio card to use? Hay, can someone tell me which audio card to choose or to point me to some site where I can read about it. I'd like to mix music. I.e. to build some kind of small home studio. Thx Regards Janez This email, including any attached files, may contain confidential and privileged information. Any review, use, distribution or disclosure of included information by unintended recipients is strictly prohibited. If you are not a named recipient or authorized to receive and / or act on information sent to a named recipient, or have reason to believe you are not or should not be one of the named recipients, please notify sender accordingly by reply email and delete all copies of this message prior to forwarding, copying or otherwise reproducing this message or attachments thereto. For information regarding the export control status of items discussed in this document, please refer to the project control list. Thank you.

22 years, 3 months

[linux-audio-user] Speak-Freely

by Richard Caldwell

Hi, I've downloaded and compiled speak-freely 7.5. I have 2 lan connected machines. I run sfpeaker on one machine, and sfmike 'IP address' on the other. Everything appears to have compiled correctly and everything appears to run correctly but I'm not getting any audio across the network! Any suggestions? I also find that when the machines are on but not running any applications that the speakers on each machine plays any audio directed into its own microphone, as if the mic on each machine is looped directly out through its own speakers. Is this normal? Any help is much appreciated. Regards, R.C. -----Original Message----- From: linux-audio-user-admin(a)music.columbia.edu [mailto:linux-audio-user-admin@music.columbia.edu] On Behalf Of linux-audio-user-request(a)music.columbia.edu Sent: 20 January 2003 09:54 To: linux-audio-user(a)music.columbia.edu Subject: linux-audio-user digest, Vol 1 #200 - 14 msgs Send linux-audio-user mailing list submissions to linux-audio-user(a)music.columbia.edu To subscribe or unsubscribe via the World Wide Web, visit http://music.columbia.edu/mailman/listinfo/linux-audio-user or, via email, send a message with subject or body 'help' to linux-audio-user-request(a)music.columbia.edu You can reach the person managing the list at linux-audio-user-admin(a)music.columbia.edu When replying, please edit your Subject line so it is more specific than "Re: Contents of linux-audio-user digest..." Today's Topics: 1. Re: Rhodes sound (Guy Clotilde) 2. Re: Rhodes sound (Larry Troxler) 3. Re: Rhodes sound (Guy Clotilde) 4. Re: Rhodes sound (Guy Clotilde) 5. Re: Which audio card to use? (Jack O'Quin) 6. Re: Rhodes sound (Matthew Yee-King) 7. [OT] Linux Music & Sound Software site updated (Dave Phillips) 8. Re: Which audio card to use? (Paul Winkler) 9. Re: Which audio card to use? (Jan "Evil Twin" Depner) 10. Re: Rhodes sound (Emiliano Grilli) 11. seeking a software sampler for Linux (Florian Berger) 12. Re: seeking a software sampler for Linux (Emiliano Grilli) 13. Re: seeking a software sampler for Linux (Vincent Touquet) 14. Re: Rhodes sound (Patrick Shirkey) --__--__-- Message: 1 Date: Sun, 19 Jan 2003 21:00:31 +0400 From: Guy Clotilde <guy.clotilde(a)wanadoo.fr> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Rhodes sound Organization: perso Reply-To: linux-audio-user(a)music.columbia.edu On/le Sat, 18 Jan 2003 09:59:45 -0500 Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme: > > Something interesting about the Rhodes electric piano, I found, was > that I played it quite differently from the way I would play an > accoustic piano. The keys are lighter weighted too, between an organ and a classical piano. That leaded to a whole different way to play it. I like to compare the difference between an accoustic and an electric guitar. I wanted to add that the Rhodes is my alltime favourite instrument and that it's perfect for funk :) Pardon my bad english. Guy CLO~ ----------------------------------------------- #ICQ 37736372 ----------------------------------------------- http://perso.wanadoo.fr/guy.clotilde/index.html ----------------------------------------------- --__--__-- Message: 2 Date: Sun, 19 Jan 2003 12:25:30 -0500 From: Larry Troxler <lt(a)westnet.com> Subject: Re: [linux-audio-user] Rhodes sound To: linux-audio-user(a)music.columbia.edu Reply-To: linux-audio-user(a)music.columbia.edu Guy Clotilde wrote: > > On/le Sat, 18 Jan 2003 09:59:45 -0500 > Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme: > > > > > Something interesting about the Rhodes electric piano, I found, was > > that I played it quite differently from the way I would play an > > accoustic piano. > > The keys are lighter weighted too, between an organ and a classical piano. That leaded to a whole different way to play it. Really? I remember the Rhodes action being quite muddy and heavy, to the point that it required some real finger muscles. > I like to compare the difference between an accoustic and an electric guitar. > I wanted to add that the Rhodes is my alltime favourite instrument and that it's perfect for funk :) Yup, just be carefull venturing more than an octave above middle C. That's where you get into "light jazz" territory and you have to know what you're doing there. Then again Chic Corea never had a problem there, but I'm quite sure he knew what he was doing. > > Pardon my bad english. It's fine Larry --__--__-- Message: 3 Date: Sun, 19 Jan 2003 23:10:16 +0400 From: Guy Clotilde <guy.clotilde(a)wanadoo.fr> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Rhodes sound Organization: perso Reply-To: linux-audio-user(a)music.columbia.edu On/le Sun, 19 Jan 2003 12:25:30 -0500 Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme: > > The keys are lighter weighted too, between an organ and a > > classical piano. That leaded to a whole different way to play it. > > Really? I remember the Rhodes action being quite muddy and heavy, > to the point that it required some real finger muscles. yep. My original Fender Rhodes and others I have played on react in a so smooth way. :) Cheers Guy CLO~ ----------------------------------------------- #ICQ 37736372 ----------------------------------------------- http://perso.wanadoo.fr/guy.clotilde/index.html ----------------------------------------------- EXPRESSO, Jazz, Funk & Musique Latine http://perso.wanadoo.fr/guy.clotilde/Expresso/ ----------------------------------------------- (°V°) --__--__-- Message: 4 Date: Sun, 19 Jan 2003 23:12:00 +0400 From: Guy Clotilde <guy.clotilde(a)wanadoo.fr> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Rhodes sound Organization: perso Reply-To: linux-audio-user(a)music.columbia.edu On/le Sun, 19 Jan 2003 12:25:30 -0500 Larry Troxler <lt(a)westnet.com> wrote / a écrit quelque chose comme: > Yup, just be carefull venturing more than an octave above middle C. > That's where you get into "light jazz" territory and you have to > know what you're doing there. Then again Chic Corea never had a > problem there, but I'm quite sure he knew what he was doing. ahah. I'm not considering myself a good player nor a "jazzman". And I really prefer Herbie Hancock, but we are going a little bit off-topic. ----------------------------------------------- #ICQ 37736372 ----------------------------------------------- http://perso.wanadoo.fr/guy.clotilde/index.html ----------------------------------------------- EXPRESSO, Jazz, Funk & Musique Latine http://perso.wanadoo.fr/guy.clotilde/Expresso/ ----------------------------------------------- (°V°) --__--__-- Message: 5 To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Which audio card to use? From: "Jack O'Quin" <joq(a)io.com> Date: 19 Jan 2003 14:33:11 -0600 Reply-To: linux-audio-user(a)music.columbia.edu > Es geschah am Donnerstag, 16. Januar 2003 23:51 als Jan \"Evil Twin\" Depner > schrieb: > > ALSA 0.9rc6 is fubar for ice1712 but the latest CVS works fine. > > Envy24control had some problems but when I talked it over with Jaroslav > > he asked me to download the latest and check it. All is well. No > > problems now. Christian Schoenebeck <christian.schoenebeck(a)epost.de> writes: > I also downloaded the latest Envy24control (alsa-tools-0.9.0rc6), but it's > not working for me - at least not with ALSA 0.9rc6. The VU meters work, but > changing a slider or mute button for example does not have any effect. I compiled envy24control from a recent CVS version. It works and is easily compiled all by itself. Just go to alsa-tools/envy24control and run ./cvscompile (IIRC). > And another problem is the default clock rate of 48kHz. Setting the master > clock to a value doesn't work. Clicking at 'Word Clock' decreases it, but to > a widely too low value - sounds like 32kHz or something... This is a (serious) bug in the alsa-0.9.0rc6 ice1712 driver. There is a fix in CVS, but I'm not using that yet because of the inconvenience of upgrading the drivers. As a workaround, I use envy24control (compiled as above). Under "Hardware Settings" first set the "Master Clock" rate to "S/PDIF In". Then, set it to "Int 44100". For some reason, the rc6 driver won't let you set "Int 44100" directly without using this trick. > So I guess I have to wait for the next Alsa release and a new Debian package, > cause compiling from CVS is too dirty for me. Try a newer version of envy24control. It's easy to do, and I think you'll be please with the result. Regards, -- Jack O'Quin Austin, Texas, USA --__--__-- Message: 6 Date: Sun, 19 Jan 2003 22:04:13 +0000 From: Matthew Yee-King <yeeking(a)no-future.com> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Rhodes sound Reply-To: linux-audio-user(a)music.columbia.edu i was just reading through lau seeing if anyone got the bristol synth running and i saw your post frank. If you do any more remixes like that, i think its only fair that you post some oggs. ;) I always meant to do some joke remixes of christmas carols. I think your heavily vibrato'd hammond could be pretty good for this. You'd need a heavy beat on it too though. - matthew On Sat, 18 Jan 2003 16:15:42 +0100 Frank Barknecht <fbar(a)footils.org> wrote: > Hallo, > Dave Phillips hat gesagt: // Dave Phillips wrote: > > And I must protest Frank B's characterization of FM's "cheezy" Rhodes > > sound ! ;-) My TX802 makes a better Rhodes sound than the original, and > > the virtual tines never break. > > I think the "Rhodes" sound, or maybe it was called something else, of > the DX7 is one of the most famous FM sounds, and it even has been > overused. The STK FM examples don't emulate the DX7 but the TX81Z, > which might be similar to your synth. It uses only 4 operators instead > of the 6 in a DX7, but that's okay. > > I recently had a lot of fun with them and the BeeThree when I was > looking for a short term birthday present. > > I can't play the keyboard, so I downloaded a whole bunch of pop tunes > in midi format from midifarm.com and other sites, you know, real > "cheezy" stuff like "Mandy" or Pink's "Let's get this party started" > and "arranged" these to use BeeThree instances with oodles of vibrato > for just about every voice except the drums, which I did with my > "angriff" Pd-drumset. > > The result was absolutly hilarious IMO, very charming and amusing, and > the lenghth of a CD was quickly filled. > > I was so impressed by my achievement, that I even re-used it for a > couple of next birthdays. ;) > > ciao > -- > Frank Barknecht _ ______footils.org__ --__--__-- Message: 7 Date: Sun, 19 Jan 2003 18:48:53 -0500 From: Dave Phillips <dlphilp(a)bright.net> To: LAU Mail <linux-audio-user(a)music.columbia.edu>, LAD Mail <linux-audio-dev(a)music.columbia.edu>, Linart <linart(a)li.org>, CM/CLM/CMN/Snd mail-list <cmdist(a)ccrma.stanford.edu>, Csound Mail <csound(a)lists.bath.ac.uk>, ALSA Users <alsa-user(a)lists.sourceforge.net> Subject: [linux-audio-user] [OT] Linux Music & Sound Software site updated Reply-To: linux-audio-user(a)music.columbia.edu Greetings: As of January 19 2003 the Linux Music & Sound Applications pages have been updated. The site may be reached here: http://sound.condorow.net (USA) Here: http://www.linuxsound.at (Europe) And here: http://www.ymo.org/linuxsound/ (Japan) The Japanese site will not update until January 20. Enjoy ! Best regards, == Dave Phillips The Book Of Linux Music & Sound at http://www.nostarch.com/lms.htm The Linux Soundapps Site at http://linux-sound.org --__--__-- Message: 8 Date: Sun, 19 Jan 2003 15:58:32 -0800 From: Paul Winkler <pw_lists(a)slinkp.com> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Which audio card to use? Reply-To: linux-audio-user(a)music.columbia.edu On Sun, Jan 19, 2003 at 05:21:40PM +0100, Christian Schoenebeck wrote: > Es geschah am Donnerstag, 16. Januar 2003 23:51 als Jan \"Evil Twin\" Depner > schrieb: > > Joe, > > > > ALSA 0.9rc6 is fubar for ice1712 but the latest CVS works fine. > > Envy24control had some problems but when I talked it over with Jaroslav > > he asked me to download the latest and check it. All is well. No > > problems now. > > I also downloaded the latest Envy24control (alsa-tools-0.9.0rc6), Note that Jan specifically said "latest CVS", not latest tarball release. The most recent tarball release, 0.9rc6, is known to be broken for the ice1712... at least, envy24control is all fubar. Sorry if I caused any confusion - in an earlier message I said to get "latest" alsa for the ice1712, but I wasn't specific enough. > So I guess I have to wait for the next Alsa release and a new Debian package, > cause compiling from CVS is too dirty for me. Sorry to hear it. -- Paul Winkler http://www.slinkp.com Look! Up in the sky! It's OX ITE! (courtesy of isometric.spaceninja.com) --__--__-- Message: 9 Subject: Re: [linux-audio-user] Which audio card to use? From: "Jan \"Evil Twin\" Depner" <eviltwin69(a)cableone.net> To: Audio-User <linux-audio-user(a)music.columbia.edu> Date: 19 Jan 2003 21:18:08 -0600 Reply-To: linux-audio-user(a)music.columbia.edu When I said to download from CVS I meant all of the ALSA packages. If you do that the clock is fixed. Jan On Sun, 2003-01-19 at 10:21, Christian Schoenebeck wrote: > Es geschah am Donnerstag, 16. Januar 2003 23:51 als Jan \"Evil Twin\" Depner > schrieb: > > Joe, > > > > ALSA 0.9rc6 is fubar for ice1712 but the latest CVS works fine. > > Envy24control had some problems but when I talked it over with Jaroslav > > he asked me to download the latest and check it. All is well. No > > problems now. > > I also downloaded the latest Envy24control (alsa-tools-0.9.0rc6), but it's > not working for me - at least not with ALSA 0.9rc6. The VU meters work, but > changing a slider or mute button for example does not have any effect. > > And that is actually a bad situation as it seems that all outputs of the > delta interface are set to max. volume by default. I had to regulate the > input amplifiers of my (external) mixer to zero (!) and it's still indicating > that the input levels are too high!!! Or is this because I use unbalanced > audio cables to connect the delta with my mixer? (the delta 1010 has balanced > outputs) > > And another problem is the default clock rate of 48kHz. Setting the master > clock to a value doesn't work. Clicking at 'Word Clock' decreases it, but to > a widely too low value - sounds like 32kHz or something... > > So I guess I have to wait for the next Alsa release and a new Debian package, > cause compiling from CVS is too dirty for me. --__--__-- Message: 10 Date: Mon, 20 Jan 2003 09:44:32 +0100 From: Emiliano Grilli <emillo(a)libero.it> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Rhodes sound Reply-To: linux-audio-user(a)music.columbia.edu > Anyone know how I can emulate a rhodes using the computer keyboard? > > A mix I'm working on really needs some hearty organ. > Patrick, somewere on my backup CDs I have a very good soundfont of a fender rhodes (sampled from real instrument) it's about 4Mb and I have to find it (this may take a couple of days) , so tell me if I can send it to you directly. Ciao -- .---------------------. | Emiliano Grilli | | emillo(a)libero.it | | Linux user #209089 | '---------------------' --__--__-- Message: 11 Date: Mon, 20 Jan 2003 10:10:56 +0100 From: Florian Berger <florib(a)arcor.de> To: linux-audio-user(a)music.columbia.edu Subject: [linux-audio-user] seeking a software sampler for Linux Reply-To: linux-audio-user(a)music.columbia.edu Hello to all, I´m searching for some kind of a HALion replacement on Linux. Just a simple engine that responses to MIDI Note on/off and Main Volume per channel, and that can be triggered using some sequencer (as MUSE or Rosegarden). Any hint would be greatly appreciated. Thank you, Florian Berger, Leipzig, Germany --__--__-- Message: 12 Date: Mon, 20 Jan 2003 10:40:50 +0100 From: Emiliano Grilli <emillo(a)libero.it> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] seeking a software sampler for Linux Reply-To: linux-audio-user(a)music.columbia.edu > Hello to all, > > I´m searching for some kind of a HALion replacement on Linux. Just a > simple engine that responses to MIDI Note on/off and Main Volume per > channel, and that can be triggered using some sequencer (as MUSE or > Rosegarden). > > Any hint would be greatly appreciated. > > Thank you, > > Florian Berger, Leipzig, Germany The two main choices that I'm aware of are: * iiwusynth (http://www.hanappe.org/iiwusynth.html) a soundfont-enabled sampler that is already included in MusE (click on config-->Soft Synhtesizer, add an istance; click on Config-->Midi ports, select the iiwu port and then click on "GUI": this brings up a window in which you can choose a soundfont) * timidity (http://www.onicos.com/staff/iz/timidity/), that can be started in ALSA server mode (of course you must have ALSA drivers, not OSS) like this: `timidity -iA -B2,8`. You can load soundfonts by specifying them in the timidity.cfg file (on my system is /usr/share/timidity/timidity.cfg) simply adding the line soundfont /path/to_my/soundfont.sf2 and comment out anything else. You can find a huge amount of soundfonts on www.hammersound.net or you can create your own with swami (http://swami.sourceforge.net/) HTH -- .---------------------. | Emiliano Grilli | | emillo(a)libero.it | | Linux user #209089 | '---------------------' --__--__-- Message: 13 Date: Mon, 20 Jan 2003 10:47:24 +0100 From: Vincent Touquet <vincent.touquet(a)pandora.be> To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] seeking a software sampler for Linux Reply-To: linux-audio-user(a)music.columbia.edu On Mon, Jan 20, 2003 at 10:10:56AM +0100, Florian Berger wrote: >Hello to all, >I?m searching for some kind of a HALion replacement on Linux. Just a >simple engine that responses to MIDI Note on/off and Main Volume per >channel, and that can be triggered using some sequencer (as MUSE or >Rosegarden). This project is your biggest hope: http://linuxsampler.sourceforge.net/ Also, check this mailinglist's archives, this question has come up before ... good luck, v --__--__-- Message: 14 Date: Mon, 20 Jan 2003 18:34:42 +0900 From: Patrick Shirkey <pshirkey(a)boosthardware.com> Organization: Boost Hardware To: linux-audio-user(a)music.columbia.edu Subject: Re: [linux-audio-user] Rhodes sound Reply-To: linux-audio-user(a)music.columbia.edu Emiliano Grilli wrote: > > >>Anyone know how I can emulate a rhodes using the computer keyboard? >> >>A mix I'm working on really needs some hearty organ. >> > > > Patrick, somewere on my backup CDs I have a very good soundfont of a > fender rhodes (sampled from real instrument) it's about 4Mb and I have > to find it (this may take a couple of days) , so tell me if I can send > it to you directly. > Absolutely. That would be much appreciated. -- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur Http://www.boosthardware.com Http://www.djcj.org - The Linux Audio Users guide ======================================== Being on stage with the band in front of crowds shouting, "Get off! No! We want normal music!", I think that was more like acting than anything I've ever done. Goldie, 8 Nov, 2002 The Scotsman --__--__-- _______________________________________________ linux-audio-user mailing list linux-audio-user(a)music.columbia.edu http://music.columbia.edu/mailman/listinfo/linux-audio-user End of linux-audio-user Digest

22 years, 3 months

[linux-audio-user] lame and low sample-rate mp3's

by Marco Scoffier

I am writing here because my problem involves many tools. I have been trying to make extremely compact mp3's for download. $lame PO_audio.wav -m m -b 8 PO_audio-low.mp3 LAME version 3.93 MMX (http://www.mp3dev.org/) CPU features: i387, MMX (ASM used), SIMD Autoconverting from stereo to mono. Setting encoding to mono mode. Resampling: input 32 kHz output 8 kHz Using polyphase lowpass filter, transition band: 2742 Hz - 2839 Hz Encoding PO_audio_kino.wav.wav to PO_audio-low.mp3 Encoding as 8 kHz 8 kbps single-ch MPEG-2.5 Layer III (16x) qval=2 Frame | CPU time/estim | REAL time/estim | play/CPU | ETA 1038/1040 (100%)| 0:05/ 0:05| 0:05/ 0:05| 13.322x| 0:00 average: 8.0 kbps Everything looks right except that when I play the resulting file in xmms or mgp123 it plays much too fast. Could the headers on the mp3 be wrong? how do I check? they show up correctly in xmms and mpg123. mpg123 PO_audio-low.mp3 ( ... ) Playing MPEG stream from PO_audio-low.mp3 ... MPEG 2.5 layer III, 16 kbit/s, 11025 Hz mono I know I used to play lower than CD quality sample rates. Does anyone have an idea what is going on? I have tried differing combinations of ecasound and lame with combinations of -sr and -rate switches, to often similar results. I am using the alsa drives from cvs for my audiofile 2496, Thanks, --Marco

22 years, 3 months

[linux-audio-user] ecamegapedal 0.4.0 released

by Kai Vehmanen

1. A short summary of changes Sliders for parameter control and text inputs for lower and upper bounds have been added as well as support for LADSPA-1.1 and ecasound effect parameter hints. There has been some user interface improvements and a native JACK support has been added. Updated to use the new ecasound-2.2 libraries. --- 2. What is ecamegapedal? Ecamegapedal is a real-time effect processor software with a graphical user interface for controlling the effect parameters. It is meant to be used as a virtual guitar-fx or studio effect box. In addition to real-time operation, ecamegapedal also supports reading from and writing to audio files. All audio object and effect plugin types provided by the ecasound libraries are supported. This includes ALSA, JACK, OSS, aRts, over 20 file formats, over 30 effect types, LADSPA plugins and multi-operator effect presets. Ecamegapedal's implementation is based on ecasound and Qt libraries. Ecamegapedal is licensed under the GPL. --- 3. Changes since the last stable release * Added native JACK support. If compiled with JACK support enabled, ecamegapedal will upon startup fetch the current engine parameters from the JACK server, and initialize the ecamegapedal configuration to work with JACK. In practice this means that you don't have to manually set the buffersize and sample rate parameters to use ecamegapedal with JACK. * Support for LADSPA-1.1 and ecasound effect parameter hints. * Text inputs for overriding default upper and lower bounds for parameter values. * Sliders for controlling parameter values. * Pixmaps for transport control buttons. * Takes advantage of the newly released ecasound 2.2.0 libraries (does not work with older ecasound releases). * Should work with all released Qt2 and Qt3 versions. Tested with qt-2.3.2, qt-3.0.5 and qt-3.1.1. --- 4. Contributors Patches Kai Vehmanen Arto Hamara Bug Hunting Jaakko Prattala Justin Rosander Junichi Uekawa Feature proposals Dan Lyons --- 5. Links and files Web sites: http://www.eca.cx http://www.eca.cx/ecamegapedal http://jackit.sourceforge.net Source and binary packages: http://ecasound.seul.org/download http://ecasound.seul.org/download/ecamegapedal-0.4.0.tar.gz -- http://www.eca.cx Audio software for Linux!

22 years, 3 months

[linux-audio-user] the continuing story of mandrake 9.0.....

by iriXx

hi all thanks for the advice patrick actually im going to upgrade to cvs will give it a go shortly and let you know the outcome have to go the back route around doing it as KDE depends on the alsa rpms.. i did a lovely job of killing X last night by messing with those... so i'm going to simply tar up the modules and install cvs... i presume a few spare extra alsa libs around the place shouldnt do any harm... i hope! thanx m~ -- iriXx www.iriXx.org copyleft: creativity, technology and freedom? info(a)copyleftmedia.org.uk www.copyleftmedia.org.uk _ ( ) ascii ribbon against html email X / \ cat /dev/sda1 > /dev/dsp *** stopping make sense ***

22 years, 3 months

[linux-audio-user] RME9652 and Stereo

by Phil Moors

alsa-0.9.0rc6 RH7.3 kernel 2.4.19 with Andrew Morton's low latency patches ASUS A7M266 Mobo w/Duron 750 single proc I have compiled, installed and loaded the ALSA rme9652 driver. It's compiled without OSS. Using arecord/aplay, I can only record and playback files in mono format. Stereo is eluding me. Pardon the ascii art, monospace font required. My configuration is: LineIn1 LineIn2 Mic ElecBass | | | | main out-----Mackie 1202-VLZpro -----LineIn 5/6 L/R | | | | | input--- ---output L/R | | L/R ART DI/O 2 channel 24bit AD/DA converter | | S/PDIF---- ----S/PDIF RCA out RCA in | | | | S/PDIF S/PDIF RCA in RCA out | | -----Hammerfall--------------------- Also, I can only arecord/aplay using the plug layer. All attempts to use hw fail with: aplay: set_params:781: Access type not available The consumer card is card0 (cs46xx, Hercules Game Theater). My .asoundrc is: pcm.Crystal { type hw card 0 } ctl.Crystal { type hw card 0 } pcm.RME9652 { type hw card 1 } ctl.RME9652 { type hw card 1 } I used alsactl store/restore to enable the S/PDIF on the Hammerfall. It works fine for mono recording and playback. The card is set to AutoSync and I can see sample rate changes made on the ART converter picked up in the Hammerfall. Thanks for any help, Phil

22 years, 3 months

[linux-audio-user] [ANN] JACK TimeMachine 0.0.2

by Steve Harris

I've fixed some build issues and theoretically made it slightly more efficient. If you managed to build 0.0.1 theres no real point in you upgrading. Theres also now a webpage of sorts, with a screenshot ;) http://plugin.org.uk/timemachine/ - Steve

22 years, 3 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Linux-audio-user